Skip to content
51
Kiwa

KH-4100

KIWA KH-4100 is a high-performance horizontal machining center with full rotary B-axis can be installed in a space for a vertical machining center. The KH-4100 is designed as slim as possible.

Compared to KIWA HMC model KH-4500kai, the KH-4100 saves floor space by 45%. In spite of the compact design, the KH-4100 is equipped with full specs for a variety of workpieces and factory automation equipment. The KH-4100 is equipped with a wide center trough in the machining area and a strong bed coolant wash. Chips will go directly down the center trough for disposal at the rear of the machine. Sheet metal covers on both sides are steeply slanted to guide chips to the trough.

Request Information

Or call 1-877-668-4262

Product Details

Product Details

  • (4) Simultaneously Controlled Axes
  • Provision for Coolant Through Spindle
  • Coolant Chip flow System
  • Spindle Oil Cooler
  • Pallet and Chip Wash
  • Chip Conveyor – LNS-Turbo MH500
  • Tool Life Management
  • AICC2 400 block look ahead
  • 1280 Meter / 512 kB Memory
  • Helical Interpolation
  • 200 Tool Off Sets
  • Macro Programming

Travel

X-Axis Travel
20.1 (510) in (mm)
Y-Axis Travel
20.1 (510) in (mm)
Z-Axis Travel
20.1 (510) in (mm)
4th Axis Travel (Rotary Table)
0 to 360 degrees

Pallet

Pallet Surface to Spindle Center
2APC: 2.0-22.0 (50-560) (single pallet: 6.9-27.0 (175-685)) in (mm)
Pallet Center to Spindle Nose
3.9-24 (100-610) in (mm)
Pallet Size
15.7x15.7 (400x400) in (mm)
Pallet Load Capacity
1100 (500) lbs (kg)
Max. Workpiece Size
21.7x33.5 (550x850) in (mm)
Pallet change Time
12.5 sec

Feed Rate

X-Axis Rapid Traverse
3149 (80) in/min (m/min)
Y-Axis Rapid Traverse
3149 (80) in/min (m/min)
Z-Axis Rapid Traverse
3149 (80) in/min (m/min)
4Th Axis
37 rpm
Cutting Feed (X/Y/Z)
1181 (30) in/min (m/min)

Spindle

Spindle Power
20 (15) HP
Spindle Speed
15000
Spindle Taper
Cat 40

Tools

Standard Number of Tools
60
Maximum Tool Weight
17.6 (8) lbs (kg)
Maximum Tool Length
15.7 (400) in (mm)
Maximum Tool Diameter
3.3/5.5 (85/140) in (mm)
Tool Changing Time- Tool to Tool
0.9 sec

General

Coolant Tank Capacity
79.3 (300) gal (L)
Machine Weight
2APC+60ATC: 16940 (7700)
Machine Control
FANUC 0i-MF -

Sorry, there are no demos for this machine.

Two technicians adjusting a machine.

Methods Machine Case Studies

View All case studies

Financing

Get machining solutions that grow your business.

Request Information

Get machining solutions that grow your business.

Contact Us