Methods
CNC Index
Find the right machine for you. Our machines allow you to say "Yes" to more jobs.
Filter Machines
- Digital Optical Comparators
- Vertical Machining Centers
- Cycle-Controlled Lathe
- Automation
- RoboDrills
- 5-Axis Machining Centers
- Turning Centers
- 4-Way Bed Lathe
- Micro Centers
- Ready To Ship
- Multi-Tasking Machines
- Horizontal Machining Centers
- Jig Borers
- Precision Centers
- Aerospace
- Automotive
- Construction
- Consumer Goods
- Die Mold
- Electronics
- Energy
- Medical
- Security
- OKK
- Weiler
- Fanuc
- Methods
- Nakamura-Tome
- Yasda
- Kiwa
Axis Strokes
- X :
- Y :
- Z :
Table
- Size :
Spindles
- Speed :
- Bearing diameter :
Feedrate
- X-Axis Rapid Traverse :
- Y-Axis Rapid Traverse :
- Z-Axis Rapid Traverse :
ATC
- Number of tools :
- Max tool diameter :
- Max tool length :
- Max tool weight :
Tank Capacity
- Hydraulic :
- Coolant Tank Capacity :
Power Supply
- Power Supply :
Motor
- Spindle Motor Power :
- Hydraulic Motor :
- Spindle Drive Motor :
Rotating Tool
- Driven Tool Spindle Speed :
30 Results
Display Settings
- Compact Design
- Big Plus Spindle
- Up to 5-Axis Simultaneous Machining
- FANUC 31i-B5 Nano CNC System
- Ultra Precise 32,000,000 Pulse/Rev Encoders
- Ai Contour Control I
- Thermal Growth Compensation
- 1.3 sec Chip to Chip
- 1.5G Accel/Decel
- Helical Interpolation Program Storage
- Rigid Tapping Up to 8,000 RPM
- Thread Milling
- High Speed Reverse Tapping
- “Quick” Tap Recovery System
- Simultaneous ATC / Table Positioning
- Easy to Automate with Methods
- Built 100% in Japan
- X and Y-axis Travel Ensure a Wide Machining Range - X-axis travel 5" below spindle center ensures a wider machining range
- Highly Rigid Design - All units are located on the main frame vertically for high rigidity
- Operator Friendly Design - Spindle Center is easy to reach, thanks to 17 in distance from the machine front and 43 in height from the floor
- New Operation Panel with NT Smart X Control - Featuring Operation Level Management, Camera, Voice Guidance, Production Management and 3D Collision check, all Included as Standard
- Modular Design - Choose from R-spindle Type or Tailstock Type
- Reliable FANUC 0i-MF Control with 10.4” LCD Screen
- Includes Manual Guide I, AICC II, 2ms BPT, and 200 Block Look Ahead
- 15,000 RPM Big Plus, 40 Taper Spindle with Air-Oil Lubrication, Spindle Chiller
- Powerful 30 HP (15 min.) Direct Drive Hollow Shaft Spindle Motor w/1000 psi CTS Prep
- Rigid Box-Way Construction in the Z-Axis
- Robust Roller Guideways in the X and Y-Axis Feature 2362 IPM Rapid Rate
- 24 Tool ATC
- Thermal Compensation
- Reliable FANUC 0i-MF Control with 10.4” LCD Screen
- Includes Manual Guide I, AICC II, 2ms BPT, and 200 Block Look Ahead
- 8,000 RPM Big Plus CAT50 Taper Gear Head Spindle with Grease Lubrication, and Ceramic Bearings,
- Powerful 359ft-lbs of torque (30 min)
- Prepped for 1000psi coolant thru spindle
- Rigid Box-Way Construction in the X, Y, and Z Axes
- Features 1181 IPM Rapid Rate in the X & Y-Axis and 945 IPM Rapid Rate in the Z-Axis
- 30 Tool ATC
- 22,000lbs machine weight
- Thermal Compensation
- Spindle Chiller
- 15,000 RPM Big Plus, 40 Taper Spindle with Air-Oil Lubrication, Spindle Chiller
- Powerful 25 HP Direct Drive Hollow Shaft Spindle Motor with 1,000 psi CTS Prep
- Robust Bridge Type Construction with Thermal Compensation
- High Performance FANUC 31i-MB5 PLUS Control with 19” TFT Fanuc Screen
- Includes Tool Center Point Control, Collision Detection, 2 GB Data Server, Manual Guide I, AICC II, 1,000 Block Look Ahead and Ethernet
- Large Capacity 60 Tool ATC
- Includes Scales in All Axes & Kinematic Calibration Hardware/Software
- Direct Drive Spindle w/ Self-Adjusting Preload System
- Through Hardened (HR60) Box Guide Ways
- Optical Scale Feedback for Precise Positioning
- Symmetrical Bridge Structure
- 3 Point Machine Base
- Thermal Distortion Stabilization
- Space Saving Footprint
- Rigid Machine Structure for Machining Various Material Types
- Probing Systems
- Opposing Two-Spindle, 3-Turret Construction
- 72 Tool Stations
- 36 Driven-Tool Stations
- 4.4 in. Y-Axis on 3-Turret
- 6,000 min-1 Driven-Tool Speed (on all 3 turrets)
- 30/25 HP Left Spindle Motor
- 25/20 HP Right Spindle Motor
- 7.5 HP x3 Driven-tool Motor (Upper / Lower)
- 3 in. Bar Capacity
- X/Y/Z axis controlled by high-speed linear motors
- Symmetrical H-shaped column
- Spindle head symmetrical longitudinally and horizontally
- Raised bed sides for increased rigidity
- Ultra precision linear guides
- High precision positioning
- Large capacity HSK-E32 spindle taper
- Superior part surface finishes
- Positioning accuracy +/- 1μm
- Thermal distortion stabilizing system for sustaining high-precision machining
- High-speed positioning
- Large cutting tool capacity
- Optional RT20 5-Axis Rotary Table
- Opposing Two-Spindle, 3-Turret Construction
- 72 Tool Stations
- 36 Driven-Tool Stations
- 3.3 in Y-axis travel on Upper Turrets
- 2.55 in Y-axis travel on Lower Turret
- 8000 RPM Driven-Tool Speed (All 3 Turrets )
- 15/10 HP Left and Right Spindle Motor
- 7.5 HPx3 Driven-Tool Motor (Upper / Lower)
- 2 in Bar Capacity
- Massive 45 Degree Slant Bed for Maximum Rigidity
- 40 / 330 HP Wide-Range Motor for Powerful Cuts
- Box Type Slides and Rigid Turret for High Accuracy
- Bar Capacity 3.5 in Standard
- All FANUC CNC Control and Servo Drives
- Dodecagonal 12 Station Turret
- Massive 45 Degree Slant Bed for Maximum Rigidity
- 30/25 HP Wide-Range Motor for Powerful Cuts
- 10 HP - 6,000 RPM Milling Turret with 120 mm Y-axis Travel
- Box Type Slides and Rigid Turret for High Accuracy
- Bar Capacity 3.5 in Standard
- All FANUC, CNC Control and Servo Drives
- Dodecagonal 12 Station Turret
- Massive 45 degree Slant Bed for Maximum Rigidity
- 20/15 HP, Wide-Range Motor for Powerful Cuts
- Box type Slides and Rigid Turret for High Accuracy
- Bar Capacity 2.5 in Standard
- All FANUC, CNC Control and Servo Drives
- Dodecagonal 12 Station Turret
- Opposing Two-Spindle, 3-Turret Construction
- 72 Tool Stations
- 36 Driven-Tool Stations
- 3.54 in. Y-axis travel on Upper Turrets
- 2.75 in. Y-axis travel on Lower Turret
- 6,000 RPM Driven-Tool Speed (All 3 Turrets )
- 20/15 HP Left and Right Spindle Motor
- 7.5 HP x3 Driven-tool Motor (Upper / Lower)
- 2.5 in. Bar Capacity
- Opposing Two-Spindle, 2-Turret Construction
- 48 Tool Stations
- 24 Driven-tool Stations
- 4.4 in Y-axis travel on Upper and Lower Turrets
- 6,000 min-1 Driven-tool Speed (Upper / Lower)
- 30/25 HP Left Spindle Motor
- 25/20 HP Right Spindle Motor
- 7.5 HP x2 Driven-tool Motor (Upper / Lower)
- 3 in Bar Capacity
- Opposing Two-Spindle, 2-Turret Construction
- 48 Tool Stations
- 24 Driven-tool Stations
- 3.54 in Y-axis travel on Upper Turret
- 2.75 in Y-axis travel on Lower Turret
- 6,000 min-1 Driven-tool Speed (Upper / Lower)
- 20/15 HP Left and Right Spindle Motor
- 7.5 HP x2 Driven-tool Motor (Upper / Lower)
- 2.5 in Bar Capacity
- Opposing Two-Spindle, Two-Turret Construction
- 48 Tool Stations
- 24 Driven-tool Stations
- 3.3 in Y-axis travel on Upper Turret
- 2.55 in Y-axis travel on Lower Turret
- 8,000 min-1 Driven-tool Speed (Upper / Lower)
- 15/10 HP Left and Right Spindle Motor
- 7.5 HP x2 Driven-tool Motor (Upper / Lower)
- 2 in Bar Capacity
- 25/20 HP Left and Right Spindle
- Driven-Tool Motor Power 7.5/5 HP, for Heavy Cutting with Small Tools
- Upper / Lower Turret Construction, 4-axis Machining as well as Various other Machining Combinations Possible on either Spindle
- Upper / Lower Turrets and Opposing Two-spindle Construction, Cycle Time Balancing and Reduction is Possible
- up to 24 Tools per Turret, 48 Tools can be Permanently Available
- Milling Turrets with Y-axis for Upper Turret
- 35/30 HP Right Spindle Motor
- 25/20 HP Left Spindle Motor
- Driven-Tool Motor Power 7.5/5 HP, for Heavy Cutting with Small Tools
- With Upper / Lower Turret Construction, 4-axis Machining as well as Various other Machining Combinations Possible on Either Spindle
- With Upper / Lower Turrets and Opposing Two-spindle Construction, Cycle Time Balancing and Reduction is Possible
- With up to 24-Tools per Turret, 48 Tools can be Permanently Available
- Milling Turrets with Y-axis for Upper Turret
- 20/15 HP Left and Right Spindle Motor
- Driven-Tool Motor Power 7.5/5 HP, for Heavy Cutting with Small Tools
- With Upper / Lower Turret Construction, 4-axis Machining as well as various other Machining Combinations Possible on Either Spindle
- With Upper / Lower Turrets and Opposing Two-spindle Construction, Cycle Time Balancing and Reduction is Possible
- With up to 24-tools per Turret, 48 Tools can be Permanently Available
- Milling Turrets with Y-axis for Upper Turret
- Motor power 15/10 HP Left and Right Spindle
- Driven-Tool Motor Power 9.5/3 HP, for Heavy Cutting with Small Tools
- Upper / Lower Turret Construction, 4-axis Machining as well as Various Other Machining Combinations Possible on either Spindle
- Upper / Lower Turrets and Opposing Two-spindle Construction, Cycle Time Balancing and Reduction is Possible.
- Up to 24-tools per Turret, 48 Tools can be Permanently Available.
- Milling Turrets with Y-axis for Upper Turret
- Massive 45 Degree Slant Bed for Maximum Rigidity
- 30/25 HP Wide-Range Motor for Powerful Cuts
- 10 HP - 6,000 RPM Milling Turret with 120 mm Y-axis Travel
- Box Type Slides and Rigid Turret for High Accuracy
- Bar Capacity 3.5 in Standard
- All FANUC CNC Control and Servo Drives
- Dodecagonal 12 Station Turret
- Massive Box-Way Slides on All Axes
- 15/10 HP Spindle Motor
- Spindle Speed: 4500 min-1,Driven-tool speed 6000min-1
- Faster Rapid Traverse: 24 m/min for the X-axis, 36 m/min for the Z-axis
- Bar Capacity: 65 mm Standard
- All FANUC CNC Control and Servo Drives.
- Dodecagonal 12 Station Turret
- Massive Box-way Slides on all Axes
- 15/10 HP Spindle Motor
- Spindle Speed 4500 min-1, Driven-tool Speed 6,000 min-1
- Faster Rapid Traverse 24 m/min for the X-axis, and 36 m/min for the Z-axis
- Bar Capacity 65 mm Standard
- All FANUC, CNC Control and Servo Drives.
- Dodecagonal 12 Station Turret
- Superimposed Machining
- Oscillating Cutting
- 15/10 HP Spindle Motor
- Spindle Speed 6,000 min-1
- Faster Rapid Traverse 20 m/min for the X-axis, and 36 m/min for the Z-axis
- Bar Capacity 52mm / 2” Standard
- All FANUC, CNC Control and Servo Drives.
- Dodecagonal 12 Station Turret
- Dual 320mm Pallets
- Roller Guide Ways
- 20HP/15,000rpm Big Plus Spindle Direct Drive
- Dual Contact Spindle 40 Taper
- 15” 0i-MF Plus Control Fanuc LCD Screen
- Coolant Through Ballscrews (CTB)
- Integrated Full Rotary B-Axis
- Excellent Chip Evacuation
- Easy Access for Setup & Maintenance
- Very compact footprint allows for increased spindle density in your shop
- Space Saving Combined Machine Tool with Y-axis & Milling Function
- Stroke: 3.22 in
- With Milling Function: 7.5/5 HP, Spindle Speed: 6000 rpm
- Strong Spindle Motor: 20/15 HP
- High Speed Index - X-axis: 24 m/min, Z-axis: 36 m/min, C-axis: 600 min-1
- Turret: Max Dodecagonal Drum Turret (Max. 24 Station)
- Number of Milling Tools (dodecagonal drum turret): 12
- Four guideways along which the slides, tailstock and steady rest are moved.
- Utmost positioning accuracy though precise, anti-friction bearings on a heavy-duty and torsion-resistant bed.
- The tailstocks and steady rest are precisely guided on hardened and finely-ground steel rails that are screwed to the machine.
- Straight-forward and precise change-over of various tooling systems ranging from tool turret, boring block and milling attachment through to a grinding unit on a heavy-duty quick-release plate.
- Heavy-duty tailstock with integrated pressure indicator
- Variety of easy-to-use steady rests that can be set from the front
- All components of the machine are clearly arranged and easily accessible
- 22” Touchscreen with Weiler ONE1 Conversational Control
- Space Saving Combined Machine Tool with Y-axis & Milling Function
- With Milling Function: 7.5/5 HP, Spindle Speed - 6000rpm
- Strong Spindle Motor: 20/15 HP - 4,500 RPM
- Subspindle Motor: 10/7.5 HP - 6,000 RPM
- C-axis synchronization
- High Speed Index - X-axis: 24 m/min, Z-axis: 36 m/min, C-axis: 600 min-1.
- Turret: Max Dodecagonal Drum Turret (Max. 24 station)
- Number of Milling Tool (dodecagonal drum turret): 12
- Compact Design
- Big Plus Spindle
- Up to 5 Axis Simultaneous Machining
- FANUC 31i-B5 Nano CNC System
- Ultra Precise 32,000,000 Pulse/Rev Encoders
- Ai Contour Control I
- Thermal Growth Compensation
- 1.3 sec Chip to Chip
- 1.5G Accel/Decel
- Helical Interpolation Program Storage
- Rigid Tapping Up to 8,000 RPM
- Thread Milling
- High Speed Reverse Tapping
- “Quick” Tap Recovery System
- Simultaneous ATC / Table Positioning
- Easy to Automate with Methods
- Built 100% in Japan
- X/Y/Z Axes Controlled by High Speed Linear Motors
- Symmetrical H-shaped Column
- Spindle Head Symmetrical Longitudinally and Horizontally
- Raised Bed Sides for Increased Rigidity
- Low Centroid X-Y Table
- Ultra Precision Linear Guides
- High Precision Positioning
- Large Capacity HSKE32 Spindle Taper
- High Quality Surface Finishes
- Positioning Accuracy < 1μm
- Thermal Distortion Stabilizing System for Sustaining High-precision Machining
- High Speed Positioning
- Large Cutting Tool Capacity
- Optional RT10 5-Axis Rotary Table