HM-X8000
*Availability of machines is based on region. Contact your local Methods office to learn more.
OKK’s HM-X8000 is a High Power 50 Taper Horizontal Machining Center with Dual Anchored Core Chilled Ball Screws and Linear Cross Roller Guides, used successfully by many of our premier Aerospace customers who have put them through some of the most extensive tests and achieved more than impressive results in Titanium, a material that demands Box Ways from our competitors.
As with all OKKs we paid special attention to the rigidity of the cast body, built solid and features our massive liner roller guides and large-diameter ball screws for the feed system, allowing the HM-X Series to easily cut exotic materials. All OKK horizontals feature Core chilled pre-tensioned and double-anchored ball screws in order to maintain the high accuracy needed throughout long hours of machining.
-
Twin Driving Ballscrews X & Y axis
-
New innovative trunnion table
-
Direct-turn APC
-
Tilt Head A-Axis
-
Heavy load capacity linear roller guides
-
Core chilled pre-tensioned and double-anchored ball screws
-
High load capacity feed motors
-
Space saving design for economical use of floor space
Travel
| X-Axis Travel | 51.2" (1300mm) |
|---|---|
| Y-Axis Travel | 43.3" (1100mm) |
| Z-Axis Travel | 61.0" (1550mm) |
| A-Axis Travel | －110° to +40° |
| B-Axis Travel | 360° |
| Table Top to Spindle Center | 2.4" – 45.7" (60mm – 1160mm) |
Table
| Table Size | Square – 800 mm (31.5 in.) |
|---|---|
| Table Load Capacity | 4409 lbs (2000kg) |
Feed Rate
| Rapid Traverse Rate (X/Y/Z) | 1890 in/min (48 m/min) |
|---|---|
| Cutting Feed (X/Y/Z) | 787 in/min (20 m/min) |
Spindle
| Spindle Power | 60/35 HP |
|---|---|
| Spindle Speed | 12,000 rpm |
| Spindle Taper | CAT50 |
Tools
| Standard Number of Tools | 233 (OP: 311/363) |
|---|---|
| Maximum Tool Weight | 55 lbs (25 kg) |
| Maximum Tool Length | 15.8" (400 mm) |
| Maximum Tool Diameter | ø 4.5" (115 mm) / ø 10.6" (270 mm) without tool in adjacent pots |
| Tool Changing Time: Cut to Cut | 5.7 sec (Speed is changeable for heavy-weight tools) |
General
| Machine Weight | 66,138 lbs (30,000 kg) |
|---|---|
| Machine Control | F31i-B5 |
