MatsuuraVertical CNC Pallet Machining Centers

You have selected: Arizona Select a new region

Pallet Shuttle machines offer extended productivity for your Vertical Machine Center.  This allows you to machine one component, while setting up an additional part, while the spindle is running.

 

ES-550 PC2 Pallet Shuttle Vertical Machining Center

The ES-550 PC2 is a dependable, high-speed, low-cost machining center. The heart of this machine is a 10-horsepower AC variable frequency spindle drive allowing extremely fast response during ramping and spindle reversals, completely revolutionizing spindle design and performance.

  • Matsuura G-Tech 840DiS Control
  • 21.5" × 16" × 18" Table Travel
  • 15,000 RPM
  • 10 H.P. Direct Drive Motor
  • 30 Tool ATC
  • 1 Second Tool to Tool
  • 23.5" x 14.9" Pallets
  • Built in Pallet Changer
  • Matsuura G-Tech 840DiS Control

 

Download Technical Specs (PDF)

ES-800V PC2 Pallet Shuttle Vertical Machining Center

The ES-800V PC2 is a rugged and reliable bed type vertical machining center utilizing a sliding head on box ways with no quill. The rigidity gained by the head design and the rugged cast-iron saddle construction assure pinpoint accuracy and reliability.

  • Matsuura G-Tech 840DiS Control
  • 31.5" × 20" × 19.5" Table Travel
  • 12,000 RPM
  • 30 H.P. IPM Motor
  • 30 Tool ATC
  • .8 Second Tool to Tool
  • 31.5" x 19" Pallets
  • Built in Pallet Changer
  • Matsuura G-Tech 840DiS Control

 

Download Technical Specs (PDF)

RA-4G Pallet Shuttle Vertical Machining Center

The RA-4G is the largest pallet changing Vertical Machine Center from Matsuura.  Solid box way construction with a 40HP 12,000RPM motor help deliver a solid production platform utilizing 50-taper tooling.

 

Download Technical Specs (PDF)

Contact your local
Matsuura distributor

Methods Machine Tools Arizona
615 West 24th Street
Tempe, AZ 85282
Tel: 602-437-2220

New! Matsuura MX-520 5-Axis VMC

New from Matsuura: the MX-520 5-Axis VMC featuring outstanding ergonomic design which allows rapid set-up and processing of complex parts.  CAMplete TruePath software - and integrated suite of G-code editing, optimization, analysis, and verification tools is standard!

Download MX-520 Catalog

New! Matsuura CUBLEX-35 5-Axis (32) Pallet Multi-tasking VMC

The CUBLEX-35 PC32 is a new addition to the Matsuura CUBLEX Series of multi-tasking VMC's.  CAMplete TruePath software is standard!

Download CUBLEX-35 Brochure

New! Matsuura CUBLEX-63 5-Axis Multi-tasking VMC

The CUBLEX-63 features a ø24.8" x 17.7" high maximum work envelope.  CAMplete TruePath software is standard.

Download CUBLEX-63 Brochure

Read about MAC Machine’s success with Matsuura (as seen in Modern Machine Shop)

When George McNab and MAC Machine needed a platform to reduce setup time on short-run jobs, the Matsuura five-axis multi-pallet system was the solution.

Download Feature Article

See how Methods helped Vanderhorst Brothers Inc meet production deadlines

A complete MAM72-35V cell with 32 pallets, and 240 tools was instrumental in meeting both quality and quantity requirements.

Download Feature Article

Methods recommends Castrol Products

Receive a Complimentary Charge of Castrol Coolant!

With Castrol as the initial fill in your new Methods Machine Tools machine, you can move right into production and be sure of a quick and reliable start.

Download Brochure

Contact Us