WT-100
Nakamura-Tome’s WT-Series turning centers are the most diverse range of dual turret multi-tasking turning centers available today. These versatile machines are used in the medical, electronics and aerospace industries.
With upper and lower 24 station turrets, complete families of parts can be machined with minimal setup times. Nakamura-Tome offers standard conversational programming on all multi-tasking models!
-
Motor power 15/10 HP Left and Right Spindle
-
Driven-Tool Motor Power 9.5/3 HP, for Heavy Cutting with Small Tools
-
Upper / Lower Turret Construction, 4-axis Machining as well as Various Other Machining Combinations Possible on either Spindle
-
Upper / Lower Turrets and Opposing Two-spindle Construction, Cycle Time Balancing and Reduction is Possible.
-
Up to 24-tools per Turret, 48 Tools can be Permanently Available.
-
Milling Turrets with Y-axis for Upper Turret
Capacity
| Max Turning Diameter | 7.5 (190) in (mm) |
|---|---|
| Distance Between Spindle Noses | max 29 (735) / min 8.3 (210) in (mm) |
| Max Turning Length | 19.8 (503) in (mm) |
| Bar Capacity | ! in (mm) |
| Bar Capacity L-Spindle | 1.65 (42) in (mm) |
| Bar Capacity R-Spindle | 1.65 (42) in (mm) |
| Chuck size | 6 (165) in (mm) |
Axis Travel
| Slide travel (Y) | ±1.3 (31)(op.) in (mm) |
|---|---|
| Slide Travel (B) | 20.7 (525) in (mm) |
| Rapid feed (B) | 1575 (40) in/min (m/min) |
| Rapid feed (Y) | 236 (6) in/min (m/min) |
| Slide Travel (X1/X2) | 5.3 (135) in (mm) |
| Slide Travel (Z1/Z2) | 19.8 (503) in (mm) |
| Rapid Feed (X1/X2) | 630 (16) in/min (m/min) |
| Rapid Feed (Z1/Z2) | 1575 (40) in/min (m/min) |
Left and Right Spindle
| Spindle Speed | 6000 rpm |
|---|---|
| Spindle Speed Range | Stepless |
| Spindle Nose | A2-5 |
| Hole Through Draw Tube | 1.7 (43) in (mm) |
C-Axis
| Least Input Increment | 1E-3 degree |
|---|
Turret
| Number of Tool Stations | 12 |
|---|---|
| Number of Indexing Positions | 24 |
Rotating Tool
| Rotary System | Individual Rotation |
|---|---|
| Spindle Speed | 6000 rpm |
| Spindle Speed Range | Stepless |
| Number of Rotation Tool Station | 12×2 |
Drive motor power
| Main Spindle | 15 HP |
|---|---|
| Right Spindle | 15 |
| Driven Tool Spindle | 9.5/3.5 HP |
General
| Machine Weight | 12125 (5500)kg lbs (kg) |
|---|
