VM940R
*Availability of machines is based on region. Contact your local Methods office to learn more.
The VM/R series increased rigidity of the main body and the spindle to provide even higher cutting performance. Its feed axes utilize highly rigid and accurate box-ways like conventional machines. This enables machining of not only general parts but also parts made of difficult-to-cut materials such as titanium. The main body design delivers heavy and accurate machining in an ergonomic friendly design.
-
Expanded working area
-
Improved accessibility
-
Increased main body rigidity
-
Core chilled ball screws
-
Double anchored support system
-
Space saving design for economical use of floor space
-
Coil-type chip conveyor
Travel
| X-Axis Travel | 81.1" (2060mm) |
|---|---|
| Y-Axis Travel | 37.0" (940mm) |
| Z-Axis Travel | 32.3" (820mm) |
| Table Top to Spindle Nose | 7.9" – 40.2" (200mm – 1020mm) |
Table
| Table Work Surface Area | 90.6" x 37.0" (2300mm x 940mm) |
|---|---|
| Table Load Capacity | 6613.9 lbs (3000 kg) |
Feed Rate
| Rapid Traverse Rate X/Y | 787 in/min (20 m/min) |
|---|---|
| Rapid Traverse Rate Z | 630 in/min (16 m/min) |
| Cutting Feed (X/Y/Z) | 787 in/min (20 m/min) |
Spindle
| Spindle Power | 35/30 HP |
|---|---|
| Spindle Speed | 8,000 rpm |
| Spindle Taper | CAT50 |
Tools
| Standard Number of Tools | 40 (OP: 60) |
|---|---|
| Maximum Tool Weight | 44 lbs (20 kg) |
| Maximum Tool Length | 15.7" (400 mm) |
| Maximum Tool Diameter | ø 4.1" (103 mm) / ø 7.9" (200mm) no tools in adjacent pots |
| Tool Changing Time- Tool to Tool | 2.9 sec (Speed is changeable for heavy-weight tools) |
General
| Machine Weight | 50,706 lbs (23,000 kg) |
|---|---|
| Machine Control | FANUC F31i-B |
