MH 320A
The MH 320A Series offers an integrated full rotary B-Axis and a reliable FANUC 0i-MF control with a 15 in. LCD screen. The machine features excellent chip evacuation and easy access for set-up/maintenance. A spindle oil cooling system and coolant-through ball-screws are standard.
The MH 320A has a compact footprint of 140 in. depth x 107 in. width including the chip conveyor.
-
Dual 320mm Pallets
-
Roller Guide Ways
-
44 HP/15,000 rpm Direct Drive
-
Dual Contact Spindle 40 Taper
-
15” Fanuc LCD Screen
-
Coolant Through Ballscrews (CTB)
-
Integrated Full Rotary B-Axis
-
Excellent Chip Evacuation
-
Easy Access for Setup & Maintenance
Travel
| X-Axis Travel | 18.1 (460) in (mm) |
|---|---|
| Y-Axis Travel | 18.1 (460) in (mm) |
| Z-Axis Travel | 13.7 (350) in (mm) |
| 4th Axis Travel (Rotary Table) | 0-360 degrees |
Pallet
| Pallet Surface to Spindle Center | 2.36-20.4 (60-520) in (mm) |
|---|---|
| Pallet Center to Spindle Nose | 2.36-16.1 (60-409) in (mm) |
| Pallet Size | 12.9×12.9 (320×320) in (mm) |
| Pallet Load Capacity | 550 (250) lbs (kg) |
| Max. Workpiece Size | 16.9×18.7 (430×475) in (mm) |
| Pallet change Time | 8 sec |
Feed Rate
| X-Axis Rapid Traverse | 1968 (50) in/min (m/min) |
|---|---|
| Y-Axis Rapid Traverse | 1968 (50) in/min (m/min) |
| Z-Axis Rapid Traverse | 1968 (50) in/min (m/min) |
| 4th Axis | 44 rpm and 41 rpm |
Spindle
| Spindle Power | 44 HP (33 kw) |
|---|---|
| Spindle Speed | 15000 rpm |
| Spindle Taper | Cat 40 Taper |
| Spindle Torque | 122 ft-lb (166 Nm) |
Tools
| Standard Number of Tools | 40 std |
|---|---|
| Maximum Tool Weight | 17.6 (8) lbs (kg) |
| Maximum Tool Length | 12.6 (320) in (mm) |
| Maximum Tool Diameter | ø 3.14 (80) in (mm) |
| Maximum Tool Diameter- No Adjacent Tool | 6.29 (160) in (mm) |
| Tool Changing Time- Tool to Tool | 2.5 sec |
General
| Coolant Tank Capacity | 80 (303) gal (L) |
|---|---|
| Machine Weight | 13889 (6300) lbs (kg) |
| Machine Control | Fanuc 0i-MF Plus |
-
Renishaw NC4 Probes
-
Jergens Tombstone
-
Hennig PureFlow Chip Conveyor
