FANUC Advanced Short Bed ROBODRILL
The FANUC Advanced Short Bed ROBODRILL is a compact vertical machining center capable of high speed, high precision, and high-efficiency operation.
The FANUC RoboDrill α-DiB5 ADV Series Short Bed offers a machine width of only 40″. This FANUC RoboDrill is known as the “space saver” model, but still offers the same speed, proficiency, and precision found in the FANUC RoboDrill medium and long-bed models.
All RoboDrills are part of our RTS program, which gives you the choice to receive your RoboDrill when it fits your schedule.
Whether in 5 days or any time after, your RoboDrill will be ready when you are. Guaranteed.
-
Compact Design
-
Big Plus Spindle
-
FANUC 31i-B5 Nano CNC System
-
Ultra Precise 32,000,000 Pulse/Rev Encoders
-
Ai Contour Control I
-
Thermal Growth Compensation
-
1.3 sec Chip to Chip
-
1.5G Accel/Decel
-
Helical Interpolation Program Storage
-
Rigid Tapping 5,000/8,000 RPM
-
Thread Milling
-
High Speed Reverse Tapping
-
“Quick” Tap Recovery System
-
Simultaneous ATC / Table Positioning
-
Easy to Automate with Methods
-
Built 100% in Japan
Travel
| X-Axis Travel | 11.8 (300) in (mm) |
|---|---|
| Y-Axis Travel | 11.8 (300) in (mm) |
| Z-Axis Travel | 15.7 (400) in (mm) |
| Spindle to Table | 5.9-18.9 (150-480) in (mm) |
Table Size
| Table Size | 24.8×13 (630×330) in (mm) |
|---|---|
| Table Capacity | 440 lbs (200 kg) |
Weight
| Machine Weight | 4740 (2150) lbs (kg) |
|---|
ATC
| ATC Type | Turret Type |
|---|---|
| ATC Turret Capacity | 21 tools |
| Tool to Tool Change Time | 0.7 sec |
| Chip to Chip Change Time | 1.3 sec |
| Max Tool Length | 7.4 (190) in (mm) |
| Max Tool Diameter | 3.14 (80) in (mm) |
Spindles
| Spindle Taper | BBT-30 Big Plus |
|---|---|
| Spindle Speed | 10000/24000 rpm |
| 10000rpm | 18.7* / 7.5** HP |
| 24000rpm | 34.8* / 7.3** HP |
Feedrate
| X-Axis Rapid Traverse | 2125 (54) in/min (m/min) |
|---|---|
| Y-Axis Rapid Traverse | 2125 (54) in/min (m/min) |
| Z-Axis Rapid Traverse | 2125 (54) in/min (m/min) |
Controls
| Control | Fanuc 31i-B5 |
|---|---|
| Maximum Programming Memory | 2mb standard (4gb optional w/flash memory) |
| Total Simultaneous Axis | Up to full 5-axis |
General
| Floor Space | 39.1" x 87.4" (995mm x 2,236mm) |
|---|---|
| Machine Weight | 4,740lb (2,150kg) |
