WY-150V
The Nakamura-Tome WY-150V is a twin spindle multitasking machine with two turrets, upper and lower, both with Y-axis. The third of the “V Series” multitasking machines, with speed as the design concept behind it. Thee is a Y-axis on the upper/lower turret and opposed twin spindles, all standard features of the WY-150V.
Enhanced processing capabilities and simultaneous left/right and upper/lower machining reinforce speed production. New software features further reduce idle time and increase time in the cut.
CAPACITY
| Max Turning Diameter | 8.8 in. (225 mm) |
|---|---|
| Max Turning Length | 26.96 in. (685 mm) |
| Slide travel (X1) | 6.31 in. (160.5 mm) |
| Slide travel (X2) | 6.31 in. (160.5 mm) |
| Slide travel (Y1) | ± 1.77 in. (± 45 mm) |
| Slide travel (Y2) | ± 1.38 in. (± 35 mm) |
| Slide travel (Z1) | 26.96 in. (685 mm) |
| Slide travel (Z) | 26.96 in. (685 mm) |
LEFT SPINDLE
| Spindle Speed | 5000 rpm |
|---|---|
| Spindle Speed Range | Stepless |
| Spindle Nose | A2-6 |
| Hole Through Draw Tube | 2.5 in. |
RIGHT SPINDLE
| Spindle Speed | 6000 rpm |
|---|---|
| Spindle Speed Range | Stepless |
| Spindle Nose | A2-5 |
| Hole Through Draw Tube | 2.0 in. |
TURRET
| Number of Tool Stations | 24 |
|---|---|
| Number of Indexing Positions | 24 |
DRIVE MOTOR POWER
| Main Spindle | 25 HP |
|---|---|
| Right Spindle | 20 HP |
| Driven Tool Spindle | 10 HP |
GENERAL
| Machine Weight | 24,250 (11,000) lbs (kg) |
|---|---|
| Footprint (H x W x W) | 7.4 ft X 1.9 ft. X 7.8 ft. |
