VC-X350
*Availability of machines is based on region. Contact your local Methods office to learn more.
The VC-X350 is a specialized 5-axis machining center developed from OKK’s advanced technologies. This machine eliminates loss of accuracy and burden on the operators caused by multi-setup operations, and also shortens lead times through process integration.
Ideal for integration with an Automatic Work Changer, the VC-X350 includes a magazine with 60 capacity, is extremely rigid, and features a table that can handle titanium and other hard metals.
-
Environment-friendly space saving design for economical use of floor space
-
Powerfully Smooth Feed
-
Core chilled ball screw and Double-anchor pre-tension system
-
Two coil-type chip conveyors
Travel
| X-Axis Travel | 23.6" (600mm) |
|---|---|
| Y-Axis Travel | 16.9" (430mm) |
| Z-Axis Travel | 18.1" (460mm) |
| A-Axis Travel | ‐120° to +30° |
| C-Axis Travel | 360° |
| Table Top to Spindle Nose | 2.8 – 20.87" (70mm – 530mm) |
Table
| Table Work Surface Area | Ø 13.8" (350mm) |
|---|---|
| Table Load Capacity | 440 lbs (200 kg) |
Feed Rate
| Rapid Traverse Rate X/Y | 1969 in/min (50 m/min) |
|---|---|
| Rapid Traverse Rate Z | 1417 in/min (36 m/min) |
| Cutting Feed (X/Y/Z) | 1417 in/min (36 m/min) |
Spindle
| Spindle Power | 50/30 HP |
|---|---|
| Spindle Speed | 12,000 rpm |
| Spindle Taper | CAT40 |
Tools
| Standard Number of Tools | 60 (OP: 80/120) |
|---|---|
| Maximum Tool Weight | 15.4 lbs (7 kg) |
| Maximum Tool Length | 11.8" (300 mm) |
| Maximum Tool Diameter | ø 3.2" (82 mm) / ø 4.9" (125 mm) without adjacent tool |
| Tool Changing Time- Tool to Tool | 1.3 sec |
General
| Machine Weight | 18,700 lbs (8,500 kg) |
|---|---|
| Machine Control | FANUC F31i-B5 |
