KH-4100 Horizontal Machining Centers

Overview Technical Data Videos Get a Quote

KIWA KH-4100 is a high-performance horizontal machining center with full rotary B-axis can be installed in a space for a vertical machining center. The KH-4100 is designed as slim as possible.

Compared to KIWA HMC model KH-4500, the KH-4100 saves floor space by 45%. In spite of the compact design, the KH-4100 is equipped with full specs for a variety of workpieces and factory automation equipment. The KH-4100 is equipped with a wide center trough in the machining area and a strong bed coolant wash. Chips will go directly down the center trough for disposal at the rear of the machine. Sheet metal covers on both sides are steeply
slanted to guide chips to the trough.

Features & Benefits
  • (4) Simultaneously Controlled Axes
  • Provision for Coolant Through Spindle
  • Coolant Chip flow System
  • Spindle Oil Cooler
  • Pallet and Chip Wash
  • Chip Conveyor – LNS-Turbo MH500
  • Tool Life Management
  • AICC2 400 block look ahead
  • 1280 Meter / 512 kB Memory
  • Helical Interpolation
  • 200 Tool Off Sets
  • Macro Programming
Options
  • AI Nano Contour Control II with 200 (400) Block Look Ahead
  • 200 Bar Overhead Hydraulic Arm Including an Eight (8) port Rotary Joint at the Center and 2 Four (4) Port Rotary Joints for each Pallet (without hydraulic unit)
  • Automatic Tool Length Measurement and Breakage Detection
  • High Pressure Coolant Through Spindle (70 Bar , 1000 PSI
  • X, Y, and Z Scales
  • Single Pallet Model
Travel
X-Axis Travel
20.1 (510) in (mm)
Y-Axis Travel
20.1 (510) in (mm)
Z-Axis Travel
20.1 (510) in (mm)
4th Axis Travel (Rotary Table)
0 to 360 degrees
Pallet
Pallet Surface to Spindle Center
2APC: 2.0-22.0 (50-560) (single pallet: 6.9-27.0 (175-685)) in (mm)
Pallet Center to Spindle Nose
3.9-24 (100-610) in (mm)
Pallet Size
15.7x15.7 (400x400) in (mm)
Pallet Load Capacity
1100 (500) lbs (kg)
Max. Workpiece Size
21.7x33.5 (550x850) in (mm)
Pallet change Time
12.5 sec
Feed Rate
X-Axis Rapid Traverse
3149 (80) in/min (m/min)
Y-Axis Rapid Traverse
3149 (80) in/min (m/min)
Z-Axis Rapid Traverse
3149 (80) in/min (m/min)
4Th Axis
37 rpm
Cutting Feed (X/Y/Z)
1181 (30) in/min (m/min)
Spindle
Spindle Power
20 (15) HP
Spindle Speed
15000
Spindle Taper
Cat 40
Tools
Standard Number of Tools
60
Maximum Tool Weight
17.6 (8) lbs (kg)
Maximum Tool Length
15.7 (400) in (mm)
Maximum Tool Diameter
3.3/5.5 (85/140) in (mm)
Tool Changing Time- Tool to Tool
0.9 sec
General
Coolant Tank Capacity
79.3 (300) gal (L)
Machine Weight
2APC+60ATC: 16940 (7700)
Machine Control
FANUC 0i-MF

Specifications subject to change without notice.

Kiwa: A Methods Partnership

Have you seen KIWA lately? Check out their latest machines and learn more about the Horizontal Machining manufacturer in this video demonstrating their partnership with Methods Machine Tools Inc.

Get a Quote

  • This field is for validation purposes and should be left unchanged.

Related Products

KH-4500

Horizontal Machining Centers

  • Ballscrew Cooling
  • Y-axis Cooling System
  • Box Type Bed
  • Stepped Layout of X-axis Guide Ways
  • Roller Type Guide Way
  • Chip conveyor – LNS-Turbo MH500

KH-55

Horizontal Machining Centers

  • (4) Simultaneously Controlled Axes
  • Provision for Coolant Through Spindle
  • Ballscrew Cooling
  • Spindle Oil Cooler
  • 200 Tool Off Sets
  • Chip Conveyor – LNS-Turbo MH500

KMH-300

Horizontal Machining Centers

  • Dual 320mm Pallets
  • Roller Guide Ways
  • 15HP/15,000rpm Direct Drive
  • Big Plus Spindle 30 Taper
  • 15” Fanuc LCD Screen

KMH-300A

Horizontal Machining Centers

  • Dual 320mm Pallets
  • Roller Guide Ways
  • 20HP/12,000rpm Direct Drive
  • Dual Contact Spindle 40 Taper
  • 15” Fanuc LCD Screen
  • Integrated Full Rotary B-Axis

KMH-500A

Horizontal Machining Centers

  • Dual 500mm Pallets
  • Roller Guide Ways
  • 25HP/12,000 rpm Direct Drive
  • Dual Contact Spindle 40 Taper
  • 15” Fanuc LCD Screen
  • Integrated Full Rotary B-Axis

KMH-500B

Horizontal Machining Centers

  • 25HP/10,000rpm Direct Drive
  • Dual Contact CAT50 Spindle Taper
  • Dual 500mm Pallets
  • Roller Guide Ways
  • 15” Fanuc LCD Screen,
  • Integrated Full Rotary B-Axis

KMH-630B

Horizontal Machining Centers

  • 25HP/10,000rpm Direct Drive
  • Dual Contact CAT50 Spindle Taper
  • Dual 500mm Pallets
  • Roller Guide Ways
  • 15” Fanuc LCD Screen
  • Integrated Full Rotary B-Axis

KMH-800

Horizontal Machining Centers

  • Dual 800 mm Pallets
  • Roller Guide Ways
  • 35 HP/8,000 rpm Direct Drive
  • Dual Contact CAT50 Spindle Taper
  • 15” Fanuc LCD Screen
  • Integrated Full Rotary B-Axis

KMH-1000

Horizontal Machining Centers

  • Dual 1000 mm Pallets
  • Roller Guide Ways
  • 35 HP/8,000 rpm Direct Drive
  • Dual Contact CAT50 Spindle Taper
  • 15” Fanuc LCD Screen
  • Integrated Full Rotary B-Axis

KMH-1250

Horizontal Machining Centers

  • Dual 1250 mm Pallets
  • Roller Guide Ways
  • 35 HP/8,000 rpm Direct Drive
  • Dual Contact CAT50 Spindle Taper
  • 15” Fanuc LCD Screen
  • Integrated Full Rotary B-Axis

Triple H40 3-Axis

Horizontal Machining Centers

  • (4) Simultaneously controlled axes (4+1)
  • Provision for coolant through spindle
  • Overhead Coolant chip flow system
  • Spindle oil cooler

Triple H40 5-Axis

5-Axis Machining Centers

  • (4) Simultaneously controlled axes (4+1)
  • Provision for coolant through spindle
  • Overhead Coolant chip flow system
  • Spindle oil cooler

Kiwa News

Methods Automates America

3/31/2017

Methods Machine Tools expands Automation footprint, launching new Automation Center in Charlotte, NC To meet the aggressively growing demand for automation and robotics in manufacturing, Methods Machine Tools, Inc., a leading supplier of innovative precision machine tools, 3D printing technology, automation and accessories, is expanding its automation capabilities, launching a new Automation and Integration Center…

Read More

Methods Machine Tools Appoints Jerry Rex as Chief Operating Officer

5/3/2016

The key appointment of Mr. Rex, a manufacturing industry veteran with more than 25 years of management experience, complements Methods’ strategic plans for future growth.

Read More

Methods Expert to Present Manufacturing Automation for Firearms to Medical at Mfg4 2016

3/21/2016

This session will discuss the difference in machine tool automation strategies used in the high volume/ low mix type of machining that firearms and other higher volume industries require versus the low volume/ high mix machining requirements in medical and other lower volume parts sectors.

Read More

Mission Statement

Methods Machine Tools will enhance the value of our customer experience at every level of our organization. We will accomplish this by providing innovative, world-class products backed by customer-focused services and support. Our goal is profitable growth through exceeding the expectations of our customers
every day.

About Us